General Study Syllabus for Engineering Sciences with Specialisation in Industrial Engineering and Management

Engineering Sciences with Specialisation in Industrial Engineering and Management

Swedish title: Teknisk fysik med inriktning mot industriell teknik

TNTEKF19

Responsible department: Department of Civil and Industrial Engineering

Subject-specific parts (*) in Swedish adopted by the Faculty Board (the Doctoral Education Board) on 2012-01-23. Revision on 2020-01-15, 2021-01-20 and 2022-08-14. Translations approved 2012-01-23, 2020-01-15, 2021-01-20 and 2022-08-24.

Faculty-common parts approved by the Faculty Board of Science and Technology on 2022-04-26. Revision on 2023-02-07.

The faculty-common parts go into force on 1 July 2022. The Faculty-common parts also apply to those who started their doctoral education prior to 1 July 2022, except if this would have a negative impact on the conditions for doctoral students.

Subject description *

The research subject of Industrial Engineering & Management covers the study of how technology is developed, creates value and diffuses in the late modern industrial society. One central point of departure are how those processes - where technical solutions find their form and areas of application – are highly influenced by economic as well as political and cultural aspects of society. Research as well as education is therefore guided by a special interest in how those transformational processes that defines innovations unfold and become organized by heterogeneous factors and mechanism of technical, economical and social nature.

The subject area thus covers a broad cross-disciplinary field that aims to understand technology in context – and from it also the prerequisites for technical development. With point of departure in different needs of technical solutions the research is characterized predominantly by longitudinal approaches (for instance process oriented or historical studies of development) that aim for a holistic perspective in order to understand the development and utilization of technical applications within different sectors of society.

The subject area spans several subfields; from areas of social science such as industrial management & organization, and innovation & entrepreneurship to more technical oriented areas such as production technology and machine construction.

Industrial management & Organization focuses on managerial and organizational problems that are characteristic in technology- and knowledge intensive environments. A central theme is the cross-functional interplay between technical, economic and social/organizational interests within technology intensive areas. (Such as for example energy production, life sciences but also within traditional manufacturing and process industry.)

Innovation & Entrepreneurship deals with the process of innovation from concept to realization of products and services from a technical as well as economic and social perspective. A central theme is the cross-functional interplay between technical, economic and social/organizational challenges during the process of development, from idea to commercialization. Business developments in order to create value for clients and to create new markets for new technologies are also central themes. Within this subfield there is a particular interest in how academic research becomes utilized in society – usually referred to as academic entrepreneurship.

Production technology is a technical sub area with cross-disciplinary elements. The research deals with the development of technical components and systems and is particularly focused on development and (technical) management of complex production systems. Of particular interest is how to maintain, run and develop such systems with regard to flexibility, robustness and performance. Topics concerning automation do also belong to the research sub area.

Machine construction is a technical sub area that covers methods and techniques for development, construction and analysis of technical applications, systems and components. Sub areas are among others: system development, methodology for construction, product modulation and simulation, construction optimization, construction automation with CAD.

Aim and objectives for the education

Overall aim and objectives of the education

Doctoral education shall develop the knowledge and skills needed to be able to conduct research independently (Higher Education Act, 1992:1434). The Higher Education Ordinance’s System of Qualifications (Appendix 2, 1993:100) sets out the requirements to be met for a doctoral and licentiate degree, respectively (see individual study plan template).

Subject-specific objectives *

Through supervision and thesis work the students shall be prepared to independently pursue research on a sound scientific base. The student shall after completed education be well informed with scientific methods within the subject area, have achieved a deep knowledge within the specific thesis area and have broad knowledge of an adjoining area. This may also include relevant knowledge of practical applications in industry and society in general.

The doctoral student shall also be able to present her/his own goals and results orally and in writing to different target groups in English and, in the case of Swedish-speaking doctoral students, in Swedish.

Entry requirement

General entry requirements

General entry requirements for doctoral education are regulated in the Higher Education Ordinance as follows:

An applicant shall be considered as meeting the general entry requirements if they have

  • completed a degree at the advanced level (Master’s level), or
  • completed course requirements of at least 240 credits, of which at least 60 credits are at the advanced level (Master’s level), or
  • acquired substantially equivalent knowledge in some other way in Sweden or abroad.

The University may permit an exemption from the general entry requirements for an individual applicant, if there are special grounds (Chapter 7, § 39 of the Higher Education Ordinance).

In order for a person who has completed course requirements of at least 240 credits (under the second item above) to be considered eligible at Uppsala University, the 60 credits at advanced level must include a degree project of at least 15 credits (AFUU § 2, UFV 2022/729).

Special entry requirements *

Special eligibility is assigned to a candidate who has taken courses within all relevant areas in the subject with sufficient breadth and depth. Thus, a person has special eligibility if she/he:

  • a) has obtained a Master’s degree in engineering from a Swedish Technical University/College and hence taken courses within the relevant areas of the subject, or
  • b) in a different way has gained knowledge principally to the same extent as in a), irrespectively of the country of study

Advertisement, selection and admission

Information and advertisement

Admission shall be made on a competitive basis following open advertisement of a doctoral place, with the exception of that which is specified in Chapter 7, § 37 of the Higher Education Ordinance. The advertisement shall be made available locally and on the University’s website (www.uu.se) at least three weeks before the application deadline and should be given appropriate national and international dissemination.

Selection

Selection among the applicants shall be carried out with consideration given to their ability to successfully conduct their studies. The assessment criteria for selection are:

  1. knowledge and skills relevant to the thesis work and the subject/specialisation
  2. assessed ability to work independently, for example
    • ability to formulate and address scientific problems
    • written and oral communication skills
    • ability to carry out independent critical analysis
  3. other experience relevant to doctoral studies, e.g. professional experience.

The assessment criteria may be demonstrated, for example, by supporting documents, an interview or a skills test.

In addition, an assessment is made of the applicant’s general competence and personal qualities, as well as their ability to collaborate. If a number of applicants are judged as being equal, preference shall be given to applicants from the underrepresented legal gender among the doctoral students in the subject/specialisation.

The mere fact that an applicant is deemed to be able to be awarded credits for prior studies or professional experience for the purpose of doctoral studies shall not give an applicant preference over other applicants during selection (Chapter 7, § 41 of the Higher Education Ordinance).

Admission

A doctoral student is admitted to a doctoral programme in a doctoral subject/specialisation. Admission of a doctoral student with full-time employment in their doctoral studentship at Uppsala University is decided by the head of the relevant department, except in cases specified in the Faculty’s guidelines for doctoral education (TEKNAT 2021/301). Admissions with other forms of funding are decided by the Faculty Board’s Working Committee after preparation in the Doctoral Education Board.

Structure and content of doctoral education

Doctoral education consists of courses and research work, and can take various forms, as specified in the individual study plan.

The research project must be well-defined and the level of ambition must be set taking into account both the degree objectives of the programme and the net study time (maximum 48 months for a doctoral degree or maximum 24 months for a licentiate degree).

Requirements for doctoral degree *

The requirements for doctoral degree consist of on one hand passed examinations in the courses included in the approved individual study plan of each doctoral student, and on the other hand passed public defense of the doctoral thesis. The program leading to the doctoral degree amounts to 240 higher education credits (four years of full-time studies), of which the thesis part amounts to a minimum of 120 higher education credits and the course part to a minimum of 60 higher education credits.

Requirements for licentiate degree *

A stage of at least 120 higher education credits (two years of full-time studies) in the third level program may be completed with a licentiate degree. The requirements for this are that the doctoral student both has passed the examinations included in the program stage and has got an academic paper amounting to a minimum of 60 higher education credits passed. The course part amounts to a minimum of 30 higher education credits.

Supervision

The head of department is responsible for ensuring that sufficient time is allotted for the department’s doctoral students to receive the necessary supervision. A doctoral student has the right to request a change of supervisor (Chapter 6, § 28 of the Higher Education Ordinance).

Individual study plan

The principal supervisor, in consultation with the professor responsible for doctoral studies (FUAP), is responsible for drawing up an initial individual study plan prior to admission. The head of department approves the study plan in connection with admission. The individual study plan shall contain a timetable for the doctoral studies, specification of how supervision is organised, and a description of the undertakings of the doctoral student and the department during the period of studies. The individual study plan also specifies the courses included in the doctoral student’s education.

The individual study plan must be revised at least annually in collaboration between the doctoral student and their supervisor. The revision involves following up on the doctoral student’s progress in relation to the degree objectives and previous plan, as well as planning for further studies. The FUAP approves the revised study plan.

Courses

Faculty-common courses

A course in research ethics, with a minimum of 2 credits and content equivalent to the courses provided by the Faculty, shall be included for the licentiate and doctoral degrees. An introductory course to doctoral studies and a course in scientific writing are also recommended.

Doctoral students who teach should undergo teacher training for higher education. This is specified in the individual study plan, and can either be a credit-bearing course element or take place within the framework of the doctoral student’s departmental service.

Teacher training for higher education, lasting 5 weeks, is equivalent to 7.5 credits at the Faculty, and may be included in the doctoral programme.

Basic Swedish language training for doctoral students who do not have Swedish as their first language may be a credit-bearing course element or take place within the framework of the doctoral student’s departmental service.

Subject-specific courses *

Within the third level program there may be different kinds of courses, such as lectures, literature studies, practical training, field studies, etc. The courses are intended to provide wider insight into the subject as a complement to the specialist competence acquired in the research work. The courses should also support the research work by providing skills in methodology, written and oral presentation.

For doctoral degree are the following courses mandatory: Courses in Theory of science (10 higher education credits), Scientific method (10 higher education credits) and Foundation of industrial engineering and management (10 higher education credits).

For licentiate degree are the following courses mandatory: Courses in Theory of science/ Methodology (10 higher education credits) and Foundation of industrial engineering and management (10 higher education credits).

Also, the course Academic teacher training course (7,5 higher education credits) is mandatory for doctoral students who teach.

Additional courses depends on the nature of the research project and are to be decided upon, in collaboration with tutoring professor, in the individual research plan. Examples of such courses may be Innovation Management, Temporary organization, Decision Theory, and Social/Business Network Analysis.

Some courses on basic (Bachelor’s) and advanced (Master’s) level that are significant for the level that are significant for the doctoral training can be credited.

Course examiner

Course examiner

For doctoral courses, the teacher responsible for the course normally serves as the examiner. The head of department appoints an examiner for a doctoral course. The task of the examiner is only to determine grades on examinations. The principal supervisor, in consultation with the FUAP and other supervisors, decides which courses and to what extent (number of credits) the doctoral student is allowed to be credited for in their doctoral studies, and this is documented in the individual study plan.

Credit transfer

It is up to the principal supervisor, in consultation with the FUAP and other supervisors, to decide which examinations (courses or other elements carried out during the study period of the doctoral education) the doctoral student will be allowed to count towards their doctoral studies and to what extent (number of credits). This shall be documented in the individual study plan. The task of the examiner is only to determine grades on examinations.

An assessment must be made as to whether credits can be awarded for prior studies or professional or vocational experience (that have been completed prior to admission to doctoral education) (Chapter 6, § 8 of the Higher Education Ordinance). At the Faculty, the FUAP is responsible for the assessment.

Thesis, doctoral defence and licentiate seminar

Thesis

The research work shall result in a scientific thesis that must be defended at a public doctoral defence. The research task may be carried out individually or in collaboration with others within or outside the department. However, the doctoral student must be trained to conduct independent research.

The doctoral thesis can be designed either as a monograph, i.e. a unified, coherent scientific work, or as a compilation thesis, i.e. a compilation of scientific papers with a summary of these. The thesis work must be equivalent to at least 120 credits (Chapter 6, §§ 4–5 of the Higher Education Ordinance, and Appendix 2, System of Qualifications). Theses within the Faculty shall include a popular science summary that is in Swedish and at least two pages long.

The doctoral thesis must either meet the requirements for publication in an international scientific journal with independent quality review, or be a summary of scientific papers with equivalent quality requirements. If the doctoral student has co-authored a paper with another person, this may be taken into account only to the extent that the individual effort can be distinguished. This should be done through a description of the doctoral student’s contribution in the papers on which a compilation thesis is based. If parts of the work have previously been published by the doctoral student in a licentiate thesis, this shall be made clear.

The licentiate thesis is smaller in scope, but is subject to the same quality requirements for constituent papers as apply for the doctoral thesis.

In consultation with the FUAP and other supervisors, the principal supervisor shall assess when the thesis work has progressed to the point that a date for doctoral defence or licentiate seminar can be set.

Doctoral defence

The forms of defence and the grading of doctoral theses are regulated in the Higher Education Ordinance, the Faculty’s Guidelines for doctoral education (TEKNAT 2021/301) and Admission and grading regulations for doctoral studies at Uppsala University (UFV 2022/729).

The doctoral thesis shall be defended orally in a public doctoral defence. An examining committee appointed by the Faculty decides on the grade for the doctoral thesis.

Licentiate seminar

The Faculty’s guidelines for doctoral education (TEKNAT 2021/301) summarise the rules for the licentiate seminar.

The grade for a licentiate thesis shall be determined by the FUAP, or another professor delegated this duty, in consultation with the principal supervisor and the external reviewer. The principal or assistant supervisor for the doctoral student may not serve as examiner.

Degree*

The following degree titles have been established for Engineering science with specialisation in industrial engineering and management:

Filosofie licentiat- och doktorsexamen

Teknologie licentiat- och doktorsexamen

The English translation for both degrees is Degree of Doctor/Licentiate of Philosophy.

Both the subject and the specialisation are listed on the degree certificate. The degree title (Teknologie/Filosofie licentiat- och doktorsexamen [Degree of Doctor/Licentiate of Philosophy]) shall be determined by the content of the doctoral education, and not by the doctoral student’s degree from a qualifying programme. If a doctoral student wishes to change their degree title to one that differs from that established for the doctoral subject dispensation is required from the Faculty Board (Working Committee). The request for a change of degree title must be made no later than the time of opponent and examining committee appointment or submission of the thesis for printing, whichever occurs first.

Doctoral and licentiate degree certificates are issued upon application in Ladok.

Doctoral and licentiate degree certificates are issued upon application in Ladok.

Regulatory framework and responsibilities for doctoral education

Doctoral education is regulated in the Higher Education Act (1992:1434) and the Higher Education Ordinance (1993:100). These are supplemented by the following local regulations: Guidelines for doctoral studies at Uppsala University (UFV 2022/728), Admission and grading regulations for doctoral studies and study programmes at Uppsala University (UFV 2022/729) and Guidelines for doctoral (third cycle) education at the Faculty of Science and Technology (TEKNAT 2021/301).

Responsibility for doctoral education ultimately rests with the University Board and the Vice-Chancellor (Chapter 2, §§ 2–3 of the Higher Education Ordinance). Through delegation, the Disciplinary Domain Board or Faculty Board has overarching responsibility and supervisory responsibility, but the day-to-day responsibility is exercised by the department in which the doctoral student is registered. Key functions in doctoral education are the head of department, professor responsible for doctoral studies (FUAP), director of doctoral studies, and the supervisor. See the Faculty’s Rules of Procedure (TEKNAT 2019/177) for a description of roles and responsibilities.

Other*

Some participation in teaching at basic (Bachelor’s) and advanced (Master’s) levels within the subject Industrial engineering and management may be part of the employment, e.g. as teaching or laboratory assistant. These tasks should not exceed 20 % of the total time, and should not restrict the effective research time (four years of full-time study) on the doctoral level.

Research in Industrial engineering and management largely relies on cross-disciplinary collaboration. It is therefore necessary that the third level student has good collaboration skills and ability to retrieve relevant knowledge from other disciplines. The position also requires good communication skills, both in writing and orally.

FOLLOW UPPSALA UNIVERSITY ON

facebook
instagram
twitter
youtube
linkedin